Laser/Electrosurgery Plume
Standards
There are currently no specific OSHA standards for laser/electrosurgery plume hazards. This section highlights OSHA standards and documents related to laser/electrosurgery plume hazards.
OSHA Standards
General Industry (29 CFR 1910) |
Related Information |
|
|---|---|---|
|
1910 Subpart I - Personal Protective Equipment | ||
1910.134, Respiratory protection. Paragraph (a)(1) states the primary objective is to control occupational diseases caused by breathing air contaminated with harmful substances. This is to be accomplished through accepted engineering controls if feasible, or through the use of appropriate respirators. Note: Surgical masks used to prevent contamination of the patient are not certified for respiratory protection of medical employees. [related topic page] |
Related Information | |
|
1910 Subpart Z - Toxic and Hazardous Substances | ||
1910.1030, Bloodborne pathogens. Paragraph (d)(3)(i) states the employer must supply appropriate personal protective equipment such as gloves, gowns, masks and eye protection. This standard would apply if such items become contaminated with viable bloodborne pathogens from laser smoke or plume. [related topic page] |
Related Information | |
State Plan Standards
State Plans are OSHA-approved workplace safety and health programs operated by individual states or U.S. territories. Most State Plans cover both private sector and state and local government workers throughout the state, while several cover only state and local government workers. See a complete listing of all State Plans. State Plans are required to have standards and enforcement programs that are at least as effective as OSHA's and may have different or more stringent requirements. Explore specific State Plan safety and health standards and regulations.
Additional Letters of Interpretation
Note: The letters in this list provide additional information that is not necessarily connected to a specific OSHA standard highlighted on this Safety and Health Topics page.
- Hazards of Smoke Generated from Surgical Procedures (April 18, 1996).
Note: These are NOT OSHA regulations. However, they do provide guidance from their originating organizations related to worker protection.
American National Standards Institute (ANSI)
The American National Standards Institute (ANSI) has developed several standards relating to laser hazards and non-beam hazards. They are recognized as a minimum standard for laser safety.
- Z136.1, Safe Use of Lasers.
- Z136.3, Safe Use of Lasers in Health Care Facilities.