Text For Citation: 01 Item/Group: 001B Hazard:

29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedure) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): (1) prepare for shut down by recognizing energy hazards and its controls, (2) turn off and shut down the machines, (3) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the energy source, (4) affix lockout or tagout devices to each energy isolating device, (5) render safe all potentially hazardous stored or residual energy, (6) verify that isolation and de-energization of the machine or equipment have been accomplished. 60 slitter, Yodel tension stand - on or about April 5, 2021, the employer did not ensure that personnel inspecting, adjusting, and changing carpet on the clamp's upper and lower boards had isolated the hazardous hydraulic energy prior to beginning work. Because the equipment was not locked out, employees had their hands exposed to caught-in hazards from the unexpected clamp closing. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).