Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1233352.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,338.00
Current Penalty: $0.00
Issuance Date: 06/26/2017
Nr Instances: 1
Nr Exposed: 6
Abatement Date: 07/13/2017
Gravity: 5
Report ID: 0524700
Contest Date:
Final Order: 07/19/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/19/2017 | $0.00 | 07/13/2017 | Serious | |
| Penalty | Z: Issued | 06/26/2017 | $6,338.00 | 07/13/2017 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a.) On or about May 16, 2017, band saw operators were exposed to amputation injuries in that the Amada horizontal band saws, including but not limited to the #5 Amada, were not locked out prior to cleaning. The employer did not ensure that energy control application steps to control the electrical and hydraulic energy sources were implemented prior to cleaning tasks the employer did not: � Physically operate energy isolating devices to control energy sources and affix lockout device(s). � Ensure that all potentially hazardous stored or residual energy was relieved, disconnected, and rendered safe. � Verify that isolation and deenergiziation of the machine or equipment had been accomplished.